AT88SC25616C MCU Crack, Atmel AT88 IC Attack | PCB Cloning MCU Code Extraction
PCB Reverse, PCB Clone,MCU Reverse,Chip Crack,PCB Manufacturing, PCB Designing, PCB Cloning, PCB fabrication, PCB Rework,PCB Assembly
phone 086-0755-25106017 && 086-0755-25106019
e-mailpcbmcu@hetelltech.com skype:hetell0755

AT88SC25616C MCU Crack, Atmel AT88 IC Attack

For AT88SC25616C MCU Code Extraction, AT88SC25616C IC Crack, AT88SC25616C MCU Break, and other Atmel IC Attack. we use high-end technologies and the latest laboratory equipment to perfect the technique of microcontroller code recovering (extracting the code from locked microcontrollers). We had analyzed a wide variety of chip types which are commonly used in different industries, which enable us to open the chips and extract the program inside with quick speed and accuracy, and thus help lauching your project quicker and cheaper.

Description

The AT88SC25616C member of the CryptoMemory family is a high-performance secure memory providing 256 Kbits of user memory with advanced security and cryptographic features built in. The user memory is divided into 16 2-byte zones, each of which may be individually set with different security access rights or combined together to provide space for 1 to 4 data files.

Features

• One of a Family of Devices with User Memories from 1-Kbit to 1-Mbit

• 256-Kbit (32-Kbyte) EEPROM User Memory

– Sixteen 2-Kbyte (16-Kbit) Zones

– Self-timed Write Cycle (5 ms)

– Single Byte or 128-byte Page Write Mode

– Programmable Access Rights for Each Zone

• 2-Kbit Configuration Zone

– 37-byte OTP Area for User-defined Codes

– 160-byte Area for User-defined Keys and Passwords

• High Security Features

– 64-bit Patented Dynamic Symetric Mutual Authentication Protocol (under

exclusive patent license from ELVA)

– Encrypted Checksum

– Stream Encryption

– Four Key Sets for Authentication and Encryption

– Eight Sets of Two 24-bit Passwords

– Anti-tearing Function

– Voltage and Frequency Monitor

• Smart Card Features

– ISO 7816 Class A (5V) or Class B (3V) Operation

– ISO 7816-3 Asynchronous T = 0 Protocol (Gemplus Patent)

– Supports Protocol and Parameters Selection for Faster Operation

– Multiple Zones, Key Sets and Passwords for Multi-application Use

– Synchronous 2-wire Serial Interface for Faster Device Initialization

– Programmable 8-byte Answer-To-Reset Register

– ISO 7816-2 Compliant Modules

• Embedded Application Features

– Low Voltage Operation: 2.7V to 5.5V

– Secure Nonvolatile Storage for Sensitive System or User Information

– 2-wire Serial Interface

– 1.5 MHz Compatibility for Fast Operation

– Standard 8-lead Plastic Packages

–     Same Pinout as 2-wire Serial EEPROMs

• High Reliability

– Endurance: 100,000 Cycles

– Data Retention: 10 years

–     ESD Protection: 4,000V min

Smart Card Applications

The AT88SC25616C provides high security, low cost, and ease of implementation without the need for a microprocessor operating system. The embedded cryptographic engine provides for dynamic, symmetric-mutual authentication between the device and host, as well as performing stream encryption for all data and passwords exchanged between the device and host. Up to four unique key sets may be used for these operations.

The AT88SC25616C offers the ability to communicate with virtually any smart card reader using the asynchronous T = 0 protocol (Gemplus Patent) defined in ISO 7816-3. Communication speeds up to 153,600 baud are supported by utilizing ISO 7816-3 Protocol and Parameter Selection.

Embedded Applications

Through dynamic, symmetric-mutual authentication, data encryption, and the use of encrypted checksums, the AT88SC25616C provides a secure place for storage of sensitive information within a system. With its tamper detection circuits, this information remains safe even under attack. A 2-wire serial interface running at 1.5 MHz is used for fast and efficient communications with up to 15 devices that may be individually addressed. The AT88SC25616C is available in industry standard 8-lead packages with the same familiar pinout as 2-wire serial EEPROMs.

If you need to read the code from the protected chip AT88SC25616C. we can help you to crack the MCU and extract the code from AT88SC25616C succesfully. Welcome to contact us by Email or Skype. Email:hetelltech@gmail.com

Copyright © 2009 - 2022 PCB Assembly
by : Hetell